casa / tudo / Plasma Cutting / All Product /
HD200W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD200W Heavy Duty, Long Life and High Performance Plasma Cutting System
The HD200W plasma cutting system is heavy duty and heavy capacity design. Cutting with Air/Air or Air/WMS
Informações detalhadas
DETAILS
HD 200W
Heavy Duty, High Performance, Long Consumable Life Plasma Cutting System
Cutting Capacity
|
Mild Steel Cut Capacity
|
Thickness
|
|
Production Pierce
|
32mm |
|
Maximum Cutting Capacity
|
60mm
|
|
Stainless Steel Cut Capacity
|
Thickness
|
Production Pierce | 25mm |
Aluminum Cut Capacity | Thickness |
Production Pierce | 25mm |
High Performance Cutting
• HD200W plasma cutting system cuts fine-feature parts with superior quality and consistency, eliminating the cost of secondary operations.
• The focused plasma arc for more powerful precision cutting up to 32mm on Mild Steel and 25mm on Stainless steel and Aluminum.
• With water spray cutting process, the stainless steel and aluminum cutting will be less warping and produce a small heat-affected zone.
Water Mist Secondary (WMS) Technology
Long Consumable Life & Fast Cutting Speed
Long Consumable Life
• 12mm mild steel；
• 200A Air/Air；
• 20s duration;
• The number of consumable starts can reach more than 500 times (ISO9013 Range 2).
Fast Cutting Speed
The cutting speed of dross free can reach 1600mm/min for 20mm mild steel.
Bevel Cutting Technology
Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.
• 1 iteration;
• Using True Bevel;
• Acceptable part and ready to start production.
Refined Torch System
• Double air system torch;
• Nozzle cooling for increased electrode life and reduced operating costs;
• Work with TOPWELL high voltage power source to shift the cutting limitation.
VIDEO
SPECIFICATIONS
Machines
|
Product Name
|
HD200W
|
|
Cut angle（ISO 9013 range*）
|
2
|
|
Weldability
|
Ready to weld
|
|
Plasma gas
|
Air
|
Shield gas | Air; Water Spray |
Product Weights & Dimensions
|
Dimensions(L*W*H)
|
960*420*1100mm
|
|
Net Weight
|
156KG
|
Basic Specification
|
Input Voltage
|
380V/400V, 3PH, 50/60Hz
|
|
Input Power
|
50KVA
|
|
Rated output voltage
|
50~200VDC
|
|
Rated Output(40℃) 100%
|
200A
|
Open circuit voltage (OCV) | 430VDC |
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
YOU MAY ALSO NEED
TP300 Consumable Kit
ALGUM COMENTÁRIO? VOCÊ É BEM-VINDO PARA DEIXAR UMA MENSAGEM PARA NÓS!
- Tel
- *Título
- *Contéudo
Avaliação
- Carregando...